zSpace 300 power requirements

Article last updated:

The zSpace 300 system requires up to 200W when running full 3D applications.

Please keep in mind this draw when planning a lab layout. Remember, outlets are not important here, but the actual circuit feeding the outlets.

Some math on the maximum number of stations per circuit:

Max load of (20A x 120V =) 2400 watts before the breaker trips.

  • Recommend 5, no more than 6 zSpace units on one 15 Amp circuit.
  • Recommend 9, no more than 10 zSpace units on one 20 Amp circuit.

These recommendations leave a small buffer and do not completely max out a circuit.

For detailed zSpace 300 hardware specifications, please see: zSpace 300 Technical Specifications.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

  • Avatar
    John Rezek

    Disappointed in how difficult it is to submit a hardware failure. I have been trying for the last 24 hours and it seems that I can't get a response to fix a hardware failure.
    Disappointed in the service.