zSpace Laptop and AIO packing units in original boxes

Article last updated:

If you need to pack a zSpace Laptop unit or zSpace AIO unit into its original box, please use these instructions to ensure the unit is properly packed.

Also, please note that the zSpace AIO is shipped wrapped in a plastic cover. Included inside the plastic covering is a silica gel packet (desiccant packet) to absorb any potential moisture.

If you are packing the zSpace AIO system for any reason, zSpace recommends to:

  1. Remove the silica gel packet from inside the plastic covering.
  2. Place the zSpace AIO back into the plastic covering.  
  3. Place the zSpace AIO into the box on the bottom foam.
  4. Place the silica gel packet back inside the plastic covering (do not drop).
  5. Proceed to place the top foam packaging, accessories and keyboard boxes, and then re-seal the box if necessary.

This procedure will minimize the potential of the silica gel packet breaking open.  When placing the zSpace AIO system back into the plastic covering without removing the silica gel packet, the packet can get caught between the bottom foot of the zSpace AIO and the bottom foam and plastic.  This can cause the silica gel packet to potentially tear open.

If you have further questions, please contact zSpace Customer Support.


Have more questions? Submit a request