Follow

zSpace 100 Hardware Components

Article last updated:

zSpace-100 Hardware Components

The zSpace consists of 6 hardware components

  • zStation (zSpace-100 display)
  • Power Supply
  • DVI-D cable
  • zSpace 3D Tracking Eyewear
  • Stylus with ferrite bead
  • USB Cable

All of these devices are important or required for correct operation of zSpace. The intent of this article is to describe each component and to help you identify and verify each one is correct and in working condition.

 For detailed zSpace-100 hardware specifications please see: https://zspace.com/?ACT=111&key=vBP1hqAGN1NVSHtJ

 

Power Supply

Using the provided power supply with your zSpace is important. Using an incorrect power supply could lead to:

  • zSpace hardware damage
  • Failure to power up
  • Poor or inconsistent performance
  • Intermittent signal loss (blue screen and/or flashes)
  • Blank black screen

 

For reference, the specifications on our zSpace-100 power supply are:

  • AC Input: 100-240V~, 1.2A, 50-60Hz.
  • DC Output: 12.0V, 6.25A MAX, 75W MAX
  • Part Number: 9NA0750409

 

Label on back side of power supply

 

Power supply with North American 3-prong wall connector

 

 

DVI-D Video Cable

If the user is using DVI-D to connect the PC to zSpace, then the zSpace Inc provided DVI-D cable is required. You may optionally use a DisplayPort cable (not provided).

For reference:

  • Part number: 115-00006
  • Rev A

 

zSpace DVI cable

 

Label on DVI cable showing part number (115-00006) on top line of label.

 

 

Eyewear

zSpace requires the use of polarized eyewear with tracking markers. The Eyewear is available as wearable glasses or clip-on style and have five (5) tracking markers. Missing tracking markers will lead to head tracking not working correctly.

For reference:

  • Tracking eyewear SKU number: TEW-01-02-00
  • Clip-on eyewear SKU number: TCO-01-00-00
  • Five (5) tracking markers

 

zSpace polarized wearable style with tracking markers

 

zSpace polarized tracking eyewear clip-on style

 

Eyewear showing tracking marker locations

 

 

Stylus

For reference:

  • SKU number: SWD-0100-00
  • Serial number on label by connector

zSpace Stylus

 

Location of label with serial number with attached ferrite bead.

 

 

 

 

zSpace USB cable

USB 2.0 Type A to Type B

 

Was this article helpful?
2 out of 2 found this helpful

Comments

© 2015 zSpace, Inc.     Terms of Use & Privacy Policy